FC1400 User Manual
FC1400OM-2.04 69 / 95
FC1400 Operation Manual
8) Marker sound
Touch to turn ON/OFF the sound when clicking Marker. Refer to Chapter 7, Fetal movement
measurement, for more information.
9) Factory
Only the administrator can enter Factory mode. In order to change the content, request for A/S through
Headquarter or agency.
10) Change Admin PW
Click this menu to change Admin password. For the initial touch, current Admin password has to be
entered and if it is confirmed, it can be changed by entering new and confirming password.
Default Admin password is "1234".
Warning
Admin password cannot be recovered after change. If password is lost, reset to Factory
mode is the only way, and all the measured data and set values will be lost. Please
keep the password safe.
11) Volume range
Click this menu to change volume range. If you want the loudest than volume range 7 or the quietest
than volume range 0.
12) Changing the screen output mode
The screen supports two output modes: Graphic Mode and Text mode. To change a screen output
mode, please touch the
“screen switching and function key” on the operation panel in the main menu.
: Home and function key
13) Protocol Version
Set the version of protocol according to the version of FC Central. To use “Note” function in
FC Central, set the protocol version 1.2 and FC Central version 1.2.2 or higher.
