FC1400 User Manual
FC1400OM-2.04 88 / 95
FC1400 Operation Manual
3)
Electrical hazard
Warning
In case Gel contacts internal electronic device, Defective probe may cause electrical
shock.
Prior to each use, visually inspect the probe lens and case area for cracks, cuts, tears,
and other signs of physical damage.
DO NOT use a probe which appears to be damaged until you verify functional and safe
performance.
Perform a more thorough inspection, including the cable, and connector, each time you
clean the probe.
DO NOT kink, tightly coil, or apply excessive force on the probe cable. Insulation failure
may result.
warning: To avoid risk of electric shock, this equipment must only be connected to a
supply mains with ground
Do not modify this equipment without authorization of the manufacturer
If this equipment is modified, appropriate inspection and testing must be conducted to
ensure continued safe use of equipment
Do not to touch signal input, signal output or other connectors, and the patient
simultaneously.
Refer servicing to qualified personnel of Bionet Co., Ltd.
Power supply is specified as a part of ME Equipment.
4) Probe acoustic output hazard
Warning
Ultrasound can produce harmful effects in tissue and potentially result in patient injury.
Always minimize exposure time. And keep ultrasound levels low when there is no
medical benefit.
5) Probe head waterproof
Mandatory Action
From US probe bottom to 2~3 cm, waterproof IPX is possible. Do NOT immerse the
probe bottom into any liquid beyond 2~3 cm from probe bottom. Never immerse the
probe connector into any liquid.
