Biohit eLINE 73002X, Руководство пользователя

Страница: 8 / 36

Cat. No. Product
73098X Biohit
e
LINE Charging Stand
73099X Biohit
e
LINE Charging Carousel
Note: If the battery is fully discharged, the display will be empty and there will
be no response from the operating buttons. After a few minutes on charge, the
battery symbol will be displayed and the + and – symbols will continue to blink
until the battery is fully charged.
8
4. Charging of the pipettor
The Biohit
e
LINE pipettors leave the factory fully charged. The battery is
protected against discharging during storage with a plastic protector. BEFORE
USE PLEASE REMOVE THE PLASTIC PROTECTOR UNDER THE BATTERY
COVER. However, should the battery become discharged during storage and
recharging is required, a battery symbol will be observed in the bottom right
corner of the display (Fig. 4).
The Biohit
e
LINE Charging Stands and
Carousels are bench top charging units.
The Charging Stand accommodates one
Biohit
e
LINE pipettor and the Charging
Carousel four Biohit
e
LINE pipettors. The
e
LINE Charging Stands and Carousels
operate through the metal contacts placed
in the sides of the pipettor and in the head
of the Charging units (Fig. 5.).
Before operating the AC-adaptor must be
connected to the socket at the rear of the
Charging Stand (Fig. 5) or at the side of the
Charging Carousel as well as to the
electrical outlet. Before connecting the AC-
adaptor to the electrical outlet, check that
its voltage settings corresponds to the
voltage settings of your electrical outlet.
4.1. Charging with the Biohit
e
LINE Charging Stand and Carousel
X: 1 = Euro, 2 = U.S., 3 = UK., 4 = Jpn, 5 = Aus
Fig. 5.
Fig. 4.
The Biohit
e
LINE pipettors should be charged
using the original Biohit
e
LINE Charging Stand or
Charging Carousel. However, the Biohit
e
LINE
also features direct charging by using the Biohit
e
LINE AC-adaptor.