21
9.
Select the speed in with (1= Min and 9 = Max)
10. Press or to confirm selection and to display the speed out
11. Select the speed out with (1= Min and 9 = Max)
Step 13
12. Press or to confirm selections
13. Position the tip to aspirate and press the START button .
The display shows PRE OUT and arrow down to indicate
the reset function.
Step 14
14. Position the tip to discard priming excess and press the
start button
15. Position the tip to dispense and press the START button
Repeat until the cycle is complete.
Step 15
16. Finally position the tip to discard any remaining excess and
press the START button twice.
Note: It is also possible to continue to aspirate and dispense
the same volumes without the empty function. To continue,
keep the START button pressed during the last dispensing Step 16
and within one second the direction arrow will change.
Keeping the START button depressed, place the tip into the liquid again and
then release the START button to aspirate the next sample.
7.4. Multi-aspirating (
SA
)
The pipettor performs consecutive aspiration operations of the programmed
volume. This mode allows e.g. emptying a microwell plate, sample pooling and
other special applications.
1.
Press to display MULTI
2.
Scroll with until the symbol SA is displayed.
3.
Confirm by pressing
4.
Select the desired aspirating volume by using
Note: When holding down the volume display starts to scroll faster.
▲
▼
▼
▼
Содержание eLINE 73002X
Страница 36: ...36 Notes...
