37
USE AND MAINTENANCE MANUAL
5.
USING THE TERMINAL
5.1
General information
5.1.1
Using the keys for browsing the menus
The numerical keys
described in par. 5.1.3 and the
customisable keys
and
allow you to browse the programming menus.
The menus can be entered from the normal display condition by selected item 2°F by pressing
. Use the other keys to select the next item of interest. A maximum of 6 functions are available
on the hotkey bar. By pressing the key corresponding to the indication MENU/OTHER, you may pass
to other functions managed by the terminal. The
,
,
and
arrows on the menus allow you to go
up, down, to the right and to the left respectively.
The SELECT key allows you to select the item in question or to enter a submenu.
The keys #and\\ allow you to change the display of the path in the menu: # the whole path, \\
path expressed in numbers. By pressing ESC you go back to the previous menu level.
Pressing ESC several times allows you to go back in the menu until you exit
it completely and return to the standard weight display.
From here on, these operating instructions will only indicate the path to be followed without referring
to the keys to be pressed. E.g., to modify contrast, the following will be displayed:
2°F>CONTR>+ or ->SAVE >ESC
