Bilanciai DD700, Руководство по эксплуатации и обслуживанию

Страница: 45 / 85

45
USE AND MAINTENANCE MANUAL
Preparing the list of preset weights
As indicated previously, the preset weights can be associated with an RcP or RcP Plate code.
The list must be prepared before carrying out any weighing operations.
Proceed as follows:

press RCP (or PPLATE);

set the desired code;

set the value of the weight to be saved;

set the product code;

set the client code;

press ESC to exit;

repeat the procedure to enter a new code.
If you do not wish to enter the product code and the client code press
ESC after having confirmed only the value of the weight.
Weighing operations with preset weights
When the vehicle is on the scale press RCP (or PPLATE) and enter the desired code to recall the
first preset weight from the list.
The weight on the scale, the code of the preset weight and its value are displayed.
Press the key to print the weighing operation. The data printed on the printing module are the
following:

date and time

product code and description (if entered)

client code and description (if entered)

RcP code (or RcP Plate) and the relative weight 1st associate weight

2nd weight

net weight
5.2.2.3 Operation with the first weight being entered manually
The operation that enables the manual entry of the first weight can be selected during installation
In this case the operations with automatically assigned data recall or license plate data recall are
disabled, therefore the data of the first weighing operation are not saved.
The latter is only printed and the related data, including the first weight, must be re-entered manually
at the time of the second weighing operation.
The command that allows the first weight to be entered is
R.WEIGHT .
The value of the weight entered must range between 0 and the maximum capacity.
5.2.2.4 Totals management
In addition to the standard totals, the following general totals are operated during the double
weighing operation(*):

Totals by Client Code

Totals by Plate
The values of the net weight and number of weighing operations associated to a given client code or
plate code are saved.
The data are available by recalling the following functions:
...>MENU>Totals Management>Client Total (hotkey CL TOT )
...>MENU>Totals Management>Plate Total (hotkey TPLATE )

PRINT produces the print of the selected total

SUMMAR produces the print of all codes

RESET resets the total

CLIENT allows you to shift to another client code

PLATE allows you to shift to another plate code
5.2.3 Sum Weighing operation