42
USE AND MAINTENANCE MANUAL
the second weighing operation, it recalls the initial data from the first weighing operation (weight,
product code, client code and vehicle license plate). For an input weighing operation or the first
weighing operation to be printed, proceed as follows:
set the required accessory data: product code, client code and vehicle license plate (if you wish to
manage these data);
It is recommended to use the PROCOD, CLIENT
and PLATE
hotkeys and refer to par. 5.1.2 and
5.1.3 to enter the numeric and alphanumeric data.
Otherwise follow the paths:
...>MENU>Data Management>Codes Management>Product Code
...>MENU>Data Management>Codes Management>Client Code
...>MENU>Data Management>Codes Management>Plates
verify that the printer is connected, switched on and with the printing
module inserted;
press the
key to print the first weighing operation.
Printing only takes place if:
the weight is stabilised within 10 seconds;
the weight is not negative or exceeds the maximum capacity.
The printed data are:
date
time
progressive number
product code with the relative description
client code with the relative description
plate
RcD code
first weight
The data of the first weighing operation are saved until the second weighing operation is printed and
then they are deleted together with the data recall code.
The RcD archive can take up to 300 elements (the number of elements can be modified during
installation).
If the maximum limit of saved RcD codes is approached, the terminal displayed a message asking
you to resize the archive.
Output operations
The terminal is only enabled to print the second weighing operation after the operator has recalled
the RcD code of the first weighing operation. Proceed as follows:
Press
RCD
.
The last RCD code used and the relative associated input weight are displayed.
Set the value of the RCD code after having read it on the print module relative to the input
operation and confirm by pressing
If the displayed code is that desired simply confirm the present value by pressing
.
The product code, plate and client code are displayed below with their descriptions that
appear during the input operation and the operator can modify them by setting the desired
value; confirm each setting by pressing the
key
Press
ESC
.
The weight on the platform, the recalled RcD and the input weight are displayed.
Press the
key to activate the output operation.
If necessary, cancel the operation by pressing
2°F
before
