73
USE AND MAINTENANCE MANUAL
If enabled, some data can be printed as a barcode, such as: product code and net weight, net
weight only, generic code + net weight, etc...
Printing can be customised by using a PC and a specific composition program: contact the supplier
for further information.
For printing features, maintenance and paper formats, etc., see the instruction manuals attached to
the various printers.
5.3.28.1
Reprinting weighing data
Pressing the Reprint item on the user menu allows you to repeat the last print carried out without
modifying the progressive number and the calculated totals.
If the terminal is type-approved, "REPRIN" will appear on the reprint to tell it apart from the original.
5.3.29 Activate Buzzer
...>MENU>Activate Buzzer
Is indicated by an acoustic signal :
1) Pressing each single button
2) During weighing operations
3) When the weight passes from "out of range" to "within range" and vice versa
continuous signal = weight in range
three signals = weight out of range
5.3.30 Product Code Archive
The product archive consists of:
code
description
tare (**)
lower limit (**)
upper limit (**)
scale (**)
When setting the product CODE, an alphanumerical description of 20 characters can be set and a
tare can be associated to it. Upon installation, you can select to use the tare associated to the
product code.
Lower and upper limits and the scale can only be consulted, as they are defined and entered as
explained in the chapter "entering weighing limits". When a code is selected with weighing limits, the
scale and unit of measurement active are selected automatically when associating "limits - product
code". Furthermore any associated tare is loaded on both scales. When a code of the product
archive is displayed and/or printed, the associated tare and limits are expressed in the unit of
measurement available when they were acquired/modified.
When the terminal is switched on, the last product code used before switching it off is active and the
tare associated to that code is loaded on both scales.
Selecting the product code 0, excludes the product code archive from the weighing operations.
5.3.31 Product Code totals Archive (*)(***)
The totals archive for the product code consists of
Code
Description
T.Net
Weighing
