63
USE AND MAINTENANCE MANUAL
5.3.10 Setting output as Range (if enabled)
The outputs available in Range mode can be used. The output is activated when the weight or
number of pieces (CPE)
(**) is within the range; this interval is set by following the path:
...>MENU>Data Management>Range
(RANGE hotkey).
5.3.11 Generic code
This is an alphanumerical code consisting of a maximum of 8 characters which can be printed and/or
transmitted. The maximum number of codes which can be set is variable and depends on which
other data you wish to manage. To set the generic code, follow the path:
...MENU>Data Management>Codes Management>Generic Code
(GCCOD hotkey).
Enter the alphanumerical code as explained in par. 5.1.3 Setting the value of the generic code =
empty space, this is no longer provided in the print and is no longer used for totalling.
5.3.12 Product code
The terminal manages product codes, each of which can have an alphanumerical description
associated to it which can be printed and/or transmitted together with the weight. The product code is
numerical and can consist of a maximum of 6 digits; the alphanumerical description can have a
maximum of 20 characters. The maximum number of codes which can be set is determined during
installation. It is variable and depends on which other data you wish to manage.
To set the product code, follow the path:
...>MENU>Data Management>Codes Management>Product Code
(PROCOD hotkey).
Enter the product code and the matching alphanumerical description as explained respectively in
par. 5.1.2 and par. 5.1.3. Setting the product code at 0 (zero) during weighing operations excludes
any totalling operation.
