GB
GB
34
35
Important Instructions for
using
Carefully clean the inside of the pot
(2)
before using the appliance for the first
time. For more information, refer to
the “Cleaning” section.
Fill the appliance with water before
switching it on.
Take care not to overfill the pot
(2)
! Fill
the pot
(2)
to a level no higher than 4
cm below the rim. Hot water may spurt
out if the pot is overfilled.
If liquids still in the pot
(2)
after use, you
have to skim it or drain it by the tap
(6)
– if available. Never tilt the device!
Assembly
The taps
(6)
for the mash tun
(BHG
410000)
and the lauter-/fermenting tun
(BHG 040002)
are included
in the package.
Install the taps such that the silicone gas-
ket is always on the outside of the vessel
on the tap. The nut must be tightened in
the lauter-/fermenting tun
(BHG 040002)
with one flat side of the sixedged nut fa
-
cing upward, so that the strainer insert
can sit horizontally in the vessel.
Cleaning and maintenance
Drag always the power plug from the
socket before cleaning. Never immerse
the appliance in water! Unplug from the
mains, wipe down the exterior. Don‘t use
strong or abrasive cleaning agents. Wash
out the interior. Limescale deposits can
be removed by regular descaling with a
mixture of vinegar and water or a com-
mercial descaler, followed by boiling of a
pot full of clean water.
Skim cleaning emulsion in the pot
(2)
or
drain it by the tap
(6)
– if available.
Never
tilt the device!
Clean the tap
(6)
– if available – occasio-
nally with hot water, which can be mixed
with a cleaning agent.
(fig. 1)
(fig. 2)
(fig. 3)
(fig. 4)
Содержание BHG 403
Страница 2: ...BHG 403 BHG 403 2 3 Notizen...
