VisiPC Software Manual Part 1 – Visilynx 3 Configurator
INS00231 Issue 4 Page 73 of 88
4.18.2 User Camera View Access Settings
‘User Camera View Access Settings’ assigns to the selected user permission to view each
camera.
This is the same list as is configured by the ‘Camera View User Access Settings’ screen (see
page 30), but arranged by user number rather than camera number.
Figure 66 User Camera View Access Settings Screenshot
•
Use the
User
selector (bottom right) to select the one to configure.
•
Tick the box adjacent to each camera on the system that the user will be allowed to view.
Note: If two users call up the same camera and both have been granted access to it, they
will both be able to view it.
•
Select None
: will untick all of the boxes simultaneously.
•
Select All
: will tick all of the boxes simultaneously.
•
Copy Previous
: will duplicate the list from the previous user number into this list, if the
list needs to be the same.
•
Accept
: will save the settings for the current page.
•
Restore
: will return all of the settings for the current page to the point when the
configuration was last saved using
Accept
.
•
Default
: will restore the settings to valid default values for the current page.
