VisiPC Software Manual Part 1 – Visilynx 3 Configurator
INS00231 Issue 4 Page 78 of 88
4.18.7 User VCR/DVR Access Settings
‘User VCR/DVR Access Settings’ assigns to the selected user permission to control each
VCR/DVR.
This is the same list as is configured by the ‘VCR/DVR User Access Settings’ screen (see
page 81), but arranged by User number rather than VCR/DVR number.
Figure 71 User VCR/DVR Access Settings Screenshot
•
Use the
User
selector (bottom right) to select the one to configure.
•
Tick the box adjacent to each VCR/DVR on the system that the user will be allowed to
control.
•
Select None
: will untick all of the boxes simultaneously.
•
Select All
: will tick all of the boxes simultaneously.
•
Copy Previous
: will duplicate the list from the previous user number into this list, if the
list needs to be the same.
•
Accept
: will save the settings for the current page.
•
Restore
: will return all of the settings for the current page to the point when the
configuration was last saved using
Accept
.
•
Default
: will restore the settings to valid default values for the current page.
