VisiPC Software Manual Part 1 – Visilynx 3 Configurator
INS00231 Issue 4 Page 46 of 88
4.8.7 Monitor User Text
‘Monitor User Text’ is only visible for V3M systems and allows you to enable and position the
on-screen user definable text. The screen operates in the same way as ‘Monitor Alarm Text’
detailed on page 40.
User text comes from a remote control ‘Wake up’ command used by trainborne racks only,
and will only appear at the monitor in response to this command.
Note: This feature is not
used in conventional CCTV installations.
Figure 45 Monitor User Text Screenshot
•
Use the
Monitor
selector (bottom right) to select the one to configure.
•
Description
: Select
Off
to ensure that the user text does not appear on the screen.
Select
On
to ensure that the user text does appear. Select
On if alarm
to ensure that
the text appears under alarm conditions only. Use the
X
and
Y
co-ordinates to position
the text as required.
•
Copy Previous
: Allows you to copy the previous monitor's settings at the touch of a
button. This is particularly useful when dealing with larger installations.
•
Accept
: will save the settings for the current page.
•
Restore
: will return all of the settings for the current page to the point when the
configuration was last saved using
Accept
.
•
Default
: will restore the settings to valid default values for the current page.
