VisiPC Software Manual Part 1 – Visilynx 3 Configurator
INS00231 Issue 4 Page 48 of 88
4.9 Multiplexer Settings
‘Multiplexer Settings’ allows you to configure a timeout delay for each multiplexer connected
to the system.
Figure 47 Multiplexer Settings Screenshot
•
Use the
Multiplexer
selector (bottom right) to select the one to configure.
•
Timeout
: selects the timeout in the range 0 to 120 seconds. If the multiplexer fails to
respond to the system within the specified time, a ‘Multiplexer Failure’ alarm will be
raised.
•
Accept
: will save the settings for the current page.
•
Restore
: will return all of the settings for the current page to the point when the
configuration was last saved using
Accept
.
•
Default
: will restore the settings to valid default values for the current page.