VisiPC Software Manual Part 1 – Visilynx 3 Configurator
INS00231 Issue 4 Page 71 of 88
4.18 User Settings
‘User Settings’ allows capabilities for each user to be set, in order to distinguish between
each user on the system.
Figure 64 User Settings Screenshot
•
Use the
User
selector (bottom right) to select the one to configure.
•
Name
: Each user can be given a name, up to 16 characters long.
•
PIN
: If required, each user can be given a 6-digit PIN for security purposes. If PINs are
issued, it is recommended that you keep a record of these in a safe place, for reference.
•
Priority
: Set the required priority rating for each user, ‘1’ being the highest priority level,
‘16’ the lowest and ‘---’ (0) being unprioritised.
•
Control Timeout
: specifies the time that a user remains in control of a camera after
releasing the keyboard joystick or other control button. This can be set between 0 and
255 seconds. During this time, lower priority users cannot control the camera.
•
Supervisor
: Tick the box to give the selected user access to all options on the V3
keyboard ‘Program Menu’. Non-supervisors can only select ‘Display Setup’ at that menu.
•
Accept
: will save the settings for the current page.
•
Restore
: will return all of the settings for the current page to the point when the
configuration was last saved using
Accept
.
•
Default
: will restore the settings to valid default values for the current page.
