Bewator Visilynx 3 Series, Руководство пользователя

Страница: 82 / 88

VisiPC Software Manual Part 1 – Visilynx 3 Configurator
INS00231 Issue 4 Page 82 of 88
•
Restore : will return all of the settings for the current page to the point when the
configuration was last saved using Accept .
•
Default
: will restore the settings to valid default values for the current page.
4.20 View Settings
‘View Settings’ configures the combination of a camera number on a given node and one of
the camera’s preset positions. This is then referred to as a view.
Figure 75 View Settings Screenshot
•
Use the View selector (bottom right) to select the one to configure.
•
Description : Each view can be given a name, up to 16 characters long.
•
Camera : Select the required camera number.
•
Node : Select the node on which the camera resides. ‘Node’ is only used when ‘Camera’
is 1 or greater.
•
Preset : Select a camera preset number to complete the desired view definition. ‘Preset’
is only used when ‘Camera’ is 1 or greater.
•
Accept
: will save the settings for the current page.
•
Restore : will return all of the settings for the current page to the point when the
configuration was last saved using Accept .
•
Default : will restore the settings to valid default values for the current page.