VisiPC Software Manual Part 1 – Visilynx 3 Configurator
INS00231 Issue 4 Page 22 of 88
4.3 Global System Settings
When the VisiPC software is first installed, or when a new configuration is created using
‘File/New’, factory default values will appear for all of the ‘Global System Settings’, as shown
below.
Figure 25 Global System Settings - V3i Default Screenshot
On first selection the ‘Configurator’ sub-program always starts with the ‘Integrated’ Product
selected. On subsequent selections the ‘Configurator’ sub-program starts up by loading the
last configuration file used, including the selected product.
If a ‘Modular’ configuration file is loaded and then the Product selector is changed to
‘Integrated’, a warning is given that the screen values will change, if required, to fit the new
system limits.
Figure 26 Product Selector – Integrated
You may now adjust the default or loaded ‘Global System Settings’ to reflect the actual
system parameters for either the V3i or the V3M system installation. When you are happy
with the ‘system’ values, you can save the set-up using the ‘Save configuration file to disk’
icon or the ‘Save’ command in the ‘File’ menu.
