VisiPC Software Manual Part 1 – Visilynx 3 Configurator
INS00231 Issue 4 Page 68 of 88
•
Use the
Telemetry card
selector (bottom right) to select the one to configure.
•
C-Type
(V3i only): ‘Off’ disables the C-type telemetry function for the camera
corresponding to that port.
‘On’ means that camera's C-type telemetry function is enabled.
•
Cameras
(V3M only): Select a number of cameras according to the rules below:
‘0’ means the port is not connected to any cameras;
‘1’ means that the port serves one camera in a point-to-point connection;
‘>1’ means that the port serves the specified number of cameras (up to 32) via a multi-
drop connection.
•
Accept
: will save the settings for the current page.
•
Restore
: will return all of the settings for the current page to the point when the
configuration was last saved using
Accept
.
•
Default
: will restore the settings to valid default values for the current page.
