Bestron DBM400, Инструкция пользователя

Страница: 41 / 68

user’s instructions
41
English
• Any stains on the interior of the lid or in the air slits will be on the surface only; these stains develop
during the baking process. They have no influence on the performance of the appliance. After each
use of the appliance remove these stains using a damp cloth with a little washing-up liquid.
• Clean the interior of the breadmaker solely with a damp cloth.
• remove the breadmaker’s lid by sliding it upwards in the attachment slots and lifting it clear (see
drawing).
• replace the lid in the reverse sequence.
Figure 3
Remove the breadmaker’s lid
• use only warm water to clean the baking tin. Avoid scratching the non-stick layer.
• Verify that the breadmaker has cooled down completely before storing it in a cupboard.
Never use the following cleaning agents utensils:
• Paint thinners;
• White spirit or petrol;
• Scourers;
• Polish;
• Chemical cleaning cloths.
cleAninG And MAintenAnce - care of the non-stick coating
Avoid damage to or scratches in the non-stick coating. Never use sharp objects such as metal spatulas,
knives or forks. The colour of the coating can change over the course of time. This is caused by the
repeated moistening and heating of the coating. However, it has no influence on the quality of the bread
baked by the breadmaker. The opening in the centre of the kneading blades must be cleaned at regular
intervals; after cleaning, lubricate with a drop of edible oil. This will prevent the kneading blades from
sticking to the drive shafts. Remove any dust from the ventilation openings.
cleAninG And MAintenAnce - storing of the breadmaker
make use that all parts are dry. Check that there is no moisture inside the appliance. Close the lid; do not
put anything on the lid.
technicAl detAils
Type: DBM400
output: 660W
Power supply: 230V ~ 50Hz
the enVironMent
• Dispose of packaging material, such as plastic and boxes, in the appropriate waste containers.
• When this product reaches the end of its useful life do not dispose of it by putting it in a dustbin;
hand it in at a collection point for the reuse of electrical and electronic equipment. Please refer to
the symbols on the product, the user’s instructions or the packaging.
• The materials can be re-used as indicated. Your help in the re-use, recycling or other means of
making use of old electrical equipment will make an important contribution to the protection of the
environment.
• Contact your municipality for the address of the appropriate collection point in your neighbourhood.