BERTHOLD TECHNOLOGIES LB 480, Руководство пользователя

Страница: 417 / 450

SENSseries LB 480 Level measurement
BERTHOLD TECHNOLOGIES GmbH & Co. KG
3 – 417
Volume 3 7 Explanations
3
7.4
Multi-point calibration
Polygon line
When should a polygon calibration be conducted?
Fig. 7-8 Multi-point calibration
A polygon calibration makes sense:
• if high precision is called for
• on irregular container shapes such as conical or lying cylindrical
vessel
• if accessories such, e.g. an agitator, are in the radiation path.
As a rule, the container is filled in steps of 5 to 10 different levels.
With the values measured in this way, the SENSseries can be
adjusted.
If it is not possible to fill the different levels with the product, you
may also use one product which is equal in density. Often water is
used as replacement for the product. Please contact our field ser-
vice staff, or BERTHOLD TECHNOLOGIES directly to get more infor-
mation on optimum calibration.
Tip
Try to record as many value pairs as possible, but use as few value
pairs as possible for calibration. A few calibration points can be
handled and controlled more easily than a lot of calibration points.
This also reduces the risk of input errors.
If you have measured several calibration points it is quite helpful to
draw the calibration curve. Using the curve it is easy to tell which
calibration points are not necessary, i.e. those that fall between
calibration points already in a flat line.
100%
0%