Bernal G 501, Руководство пользователя

Страница: 55 / 62

55
GB
SETUP FORCE (MENU F)
SEE 7.1
09
Explanation of the PIN entry:
After selecting the menu item Force with ENTER, PIN entry is
carried out. For this, select the first digit of the PIN with by
entering change to the next PIN digit. Repeat the procedu-
re of selecting the digits with and changing to the next digit
of the PIN by entering for the second and third digit of the
PIN. After selecting the fourth digit of the PIN with , press
on ENTER. If the PIN entry was correct, you can adjust the
force of the drive.
Selection of the digit from 0-9
Selection of the next digit of the PIN
ENTER
Next Page 10
CAUTION! Changing the closing force setting may lead to injuries to persons and/or damage to property.
For this reason changing the closing force must only be carried out by a competent person approved by
BERNAL. If adjustment should be necessary, compliance with the normative values (force values specified in
Standard EN 12453) must be demonstrated with appropriate measuring equipment by the competent person
who has carried out the adjustment. To the extent that this is allowed by law, BERNAL assumes no liability for
damage caused by improper changes to the closing force settings. The PIN required for changing the closing
force settings is: 5283.
PIN input is required