Belmont 200-00263, Руководство пользователя

Страница: 68 / 106

Allon
®
User Manual
DDT-063-000 Rev C Belmont Medical Technologies Page 68 of 106
Before Each Use
1. Use PPE as recommended by the disinfectant’s manufacture.
2. Make sure that the system is turned off and unplugged from power.
3. Using a lint free cloth with sterile water, clean the exterior of the machine, the
LCD screen, the hoses, the power cord and the reusable temperature
probes1 from any soiling.
4. Prepare the disinfectant solution as described by the manufacturer.
5. Using a lint free cloth with the disinfectant, disinfect the exterior of the
machine, the LCD screen, the hoses, the reusable temperature probes1 and
the power cord.
NOTE:
Allow disinfectant contact time according to the disinfectant
manufacturer's instructions.
6. For residue removal, use a new lint free cloth moistened with sterile water.
Use the cloth on the exterior of the system, the LCD screen, the power cord,
the reusable temperature probes
1
and the hoses.
CAUTION!
Do not apply physical pressure on the screen.
7. Prior to treating the patient:
Fill the water tank with 6 liters sterile water.
Plug the system into power, turn ON and start the system.
8. Continue patient’s treatment according to the protocol.
For storage - Refer to “Before Storage”.
Before Storage
NOTE: See “Required Tools for Cleaning and Disinfection” and
“Recommended Disinfectants for External Surfaces”.
1. Add sodium dichloroisocyanurate (NaDCC) tabs or powder to the water tank per
NaDCC manufacturer instructions.
2. Operate the machine on Standby mode for 30 minutes.
3. Drain the water using the Male Connector for Draining Water Tank.
NOTE: The emptying process is an integrated feature of the Allon®.
Refer to the Emptying instruction: “Empty”.