Belmont 200-00263, Руководство пользователя

Страница: 39 / 106

Allon ® User Manual
DDT-063-000 Rev C Belmont Medical Technologies Page 39 of 106
NOTE:
In case of overfilling, see Table 11.
5. Connect the Allon® device to the power source.
6. Power on the Allon® device, which will initiate the Self-Test.
(See
Turning on the System.)
Turning on the System
To turn on the system :
1. Turn the main switch, located in the rear of the unit, upwards to the
ON position. Once power is supplied to the Allon ® device, the unit
performs a self-test.
The self-test is performed in order to ensure the proper functioning of the
Allon ® device. A self-test is conducted every time the system is restarted.
In the event of a power failure of less than 10 minutes, the self-test will not
be performed and the Allon ® device will remain in operation mode.
During the self-test, the “Performing Self Test” message appears until the
system is ready.
Figure 14: Initial Self-Test Screen
Successful completion of the self-test indicates that the Allon ® device is ready
to operate.
CAUTION! Whenever the Allon ® device is activated, a self-test must be
performed. Do not interrupt the self-test and wait until it is
finished.
NOTE:
During the Self-Test, the machine and display software
versions are shown.