BELFORT
INSTRUMENT
Proprietary Information
14.
The program will respond with the name and version of the main board program loaded
in the U.U.T. The format for the firmware revision is “Belfort AWOS ACBS 1.05D
(02/11/08). The “1.05D” is the code revision and the “02/11/08” is the firmware creation
date. Verify that the code version is the correct version for the UUT by comparing the
version number with the version in the products Software Firmware Archive Released
folder. If firmware is not correct, return the unit to the Belfort Factory for code upgrade.
15.
Enter a “v” command followed by a <cr>. The program will respond with the name and
version of the sensor board program loaded in the DCP. The format for the firmware
revision is “Belfort AWOS CBS 1.01 (02/11/08). The “1.01” is the code revision and the
“02/11/08” is the firmware creation date. Verify that the code version is the correct
version for the UUT.
16.
To configure the DCP, enter the command “c” <cr>.
17.
To enter the “Configuration Data”, press the backspace key until the field is blank. Enter
the date the DCP was configured as follows: Year, month, and day in the following
format “xxxx-xx-xx”. Press <cr>. Enter a Configuration Date on the Comprehensive
Facility Performance and Adjustment Form.
18.
To enter the “Latitude” information, press the backspace key until the field is blank.
Enter the Latitude information from the AIRNAV and Customer Site Survey
documentation. Press <cr>. Enter the Latitude on the Comprehensive Facility
Performance and Adjustment Form.
19.
To enter the “Longitude” information, press the backspace key until the field is blank.
Enter the Longitude information from the AIRNAV and Customer Site Survey
documentation. Press <cr>. Enter the Longitude on the Comprehensive Facility
Performance and Adjustment Form.
20.
To enter the “Optional ID”, press the backspace key until the field is blank. Enter the
maximum 4 character desired airport designator followed by <cr>. This may be defined
by the customer. Enter the Optional ID the Comprehensive Facility Performance and
Adjustment Form.
21.
To enter the “Runways”, press the backspace key until the field is blank. Enter the
desired airport runways separated by a space character, from the AirNav document.
Press <cr>. Enter the Runways on the Comprehensive Facility Performance and
Adjustment Form.
22.
To enter the “Sensor Elevation”, press the backspace key until the field is blank. Enter
the elevation value. This value will need to be supplied by the customer from their Site
Survey document and add the additional height of the sensors on the tower supplied with
the system. Press <cr>. Enter the Sensor Elevation on the Comprehensive Facility
Performance and Adjustment Form.
23.
To enter the “Field Elevation”, press the backspace key until the field is blank. Enter the
elevation value. This value may need to be supplied by the customer or use the AirNav
Содержание AWOS
