Belden Grass Valley GV Korona, Руководство пользователя

Страница: 96 / 433

96
Video Mix/Effects
DPM Source and Target Space Explained
For the CROP, SHAD, FILM, and FRZ buttons, DELG must be pressed below each to delegate
the MFM to those functions (not available for 2D DPMs).
DPM Source and Target Space Explained
Source space refers to a key moving along the X, Y, and Z axes of the partition global
channel while Target space refers to the key moving along the X, Y, and Z axes of the
monitor (refer to the Switcher Concepts Manual on grassvalley.com for a complete
description).
Tally and DPMs
Tally is available only for DPMs that are on-screen. For example if a DPM is flown in from off-
screen with an E-MEM, tally is off until the DPM is on-screen.
DPM Transform Menu
A DPM activated in a keyer can be controlled with the Transform menu. The Transform
menu allows you to select the keyer or Global channel to control (delegation), select the
desired type of transform control, and then adjust the parameters associated with the
chosen control using the soft knobs or a pop-up keypad. The menu is accessed by selecting
iDPM, Transform.
The Joystick (X, Y, Z, Size) can be controlled from the menu with the soft knobs or keypad
entry.
Enable DPM Transforms in the Menu
The Transform menu contains a data pad matrix in the upper left for delegation. Data pads
for keyers with DPMs assigned will be active. Inactive keyers will be grayed out. Select an
active data pad to delegate the menu to control keyers, or to control a Global Channel (see
DPM Global Channel Assignments ). The keyer data pads themselves indicate whether Crop
is enabled, Global Assignment is on, and if the Key Signal is off.
DPM Global Channel Assignments
The Primary Global and Secondary Global Channels are assigned in the iDPM, Transform
menu, however the Secondary Global channel requires configuration in the M/E, Mode
menu (see
Set Up a DPM Secondary Global Channel , on page 114).
When a keyer is assigned to a Global Channel, it is also affected by transforms of that Global
Channel, permitting the easy creation of complicated multi-channel moves. Multiple keyers
can be assigned to a Global channel, allowing coordinated moves of all the assigned keyers.
A keyer is associated with the Global channel by delegating the keyer, then selecting the
Global modifier button in the ME/Keyer matrix on the upper left side of the Transform
menu so it is illuminated. Using the Multi select button, more than one keyer can be
selected at a time. The first keyer matrix button selected with the Global channel turns blue
while subsequent buttons are outlined in blue when selected.