Belden Grass Valley GV Korona, Руководство пользователя

Страница: 116 / 433

116
Video Mix/Effects
eDPMs
2 In the iDPM (or eDPM in eDPM mode), Border menu, select the Square Border or
Round Border button to enable Borders.
3 Select the Separate Edges button to enable that function.
4 Select the Width or Softness data pad.
5 Use the Border Size / Softness Top , Right , All , Left , or Bottom soft knobs or pop-up
keypads to adjust the edges independently of the others.
eDPMs
The GV Switcher eDPM option is like an external two channel DVE built into the switcher.
Either of the outputs (eDA for the Primary Partition and eDC for the Secondary Partition)
can be combined and composited for re-entry, allowing multiple eDPM Channels on one
keyer. eDPM channels run on their own timelines which makes this feature very flexible.
Combining iDPMs with eDPMs can be very powerful. With the addition of eDPMs, you
could:
• On the same M/E, create four iDPM transforms on Keyers 1-6 and then create two eDPM
transforms (perhaps a graphic and a clock) and assign those transformed sources to
Keyers 5 and 6,
• Map the M/E to a PGM PST source select button and have a composite of six DVEs on
one source to take to air, then
• Assign the M/E source to one of the four keyers on PGM PST and key the composite of
DPMs, or
• Apply an additional transform to the composite with a PGM PST iDPM on any of the first
four keyers and transform the entire composite.
eDPM Channels assigned to the Primary Partition can be made visible in the Secondary and
vice versa.
The GV Switcher eDPM option has similar menus and controls to the iDPM option.
eDPM and Effects
eDPM is completely separate from the rest of the Switcher Master E-MEM so you can recall
and run effects from the eDPM independently, or, you can use the Master E-MEM timeline
to recall and run the eDPM. This allows you to control the eDPM exactly as you would with
an external DPM. Also, you can have multiple E-MEM registers recalling the same eDPM
effect.
The switcher timeline and the eDPM timeline can be different registers and have different
lengths. If you run the timeline from the eDPM Timeline, it will run the effect as created in
the eDPM or if you run it from the Master E-MEM timeline (Switcher mode), it will run until
the Master E-MEM timeline is complete.
If your E-MEM effect in the Master E-MEM only has one keyframe, you must insert an
additional keyframe to run the entire eDPM effect timeline.
Note: The Border Size All/Softness All data pads allow you to adjust the
relative values for size or softness of all edges simultaneously.