Belden Grass Valley GV Korona, Руководство пользователя

Страница: 363 / 433

363
Kayenne/Karrera/GV Korona
User Manual
Set Freeze Mode
In interlaced formats, Freeze Mode can be set to Frame, Field 1, or Field 2. This is very useful
if you need to eliminate motion flicker or artifacts from an interlaced still.
1 Select a still from the scrolling list.
2 Toggle the Capture Still button off.
3 Select the Freeze Mode button.
4 Viewing the still on a monitor, select the Frame / Field 1 / Field 2 buttons to change the
mode for the best result.
5 Select the Confirm button.
Kayenne K-Frame Image Store Device Control
Stills can be controlled from both the DCM (Device Control Module) and the System Bar on
the Control Panel.
The DCM (Device Control Module), allows you to scroll through and select an Image Store
channel (1-10), select a still for the channel, and load that still.
Image Store Device Control—Device Control Module
1 Use the soft knob in the upper right of the DCM to scroll through the devices until the
desired Image Store channel is seen in the display.
2 Use the bottom-most soft knob to scroll through the stills until the desired Image ID is
displayed.
3 Press the Load button (right).
The still is loaded to the Image Store output channel.
Kayenne K-Frame System Bar Control
Image Store channel stills can be selected and loaded from the System Bar Module.