Belden Grass Valley GV Korona, Руководство пользователя

Страница: 333 / 433

333
Kayenne/Karrera/GV Korona
User Manual
Re-center the image:
1 Select the Crop Edge data pad.
2 Select the Pan or Scan button.
3 Use the Crop Edge Pan or Crop Edge Scan soft knob to pan or scan until the image is
re-centered.
Corner Pinning from the Kayenne Control Panel
Corner Pinning can be performed from the MFM (Multi-Function Module), in the iDPM (and
identically the eDPM), CPin menu.
The CPin (Corner Pinning) button is in the iDPM menu of the MFM.
iDPM Menu—Multi-Function Module
Corner Pinning and Crop controls are located in the CPin MFM Module menu. Press the CPin
button to enable/disable Corner Pinning, press the Dlg button directly below to turn on
Corner pinning and adjust the Corner Pinning parameters using the soft knobs.
Note: Panning scanning beyond (+ 16:9 for example) can have
unexpected results, i.e. the picture may begin to stretch.
Note: Corner Pinning and Crops have their own path controls, however
each corner and each crop edge share the same path. See Change Path
Control Values in an Effect , on page 276 for more information about
paths.