Belden Grass Valley GV Korona, Руководство пользователя

Страница: 191 / 433

191
Kayenne/Karrera/GV Korona
User Manual
If the Control Panel has fewer than four Stripes, then only rows for those Stripes present will
be shown. If the Control Panel has more than four stripes, then pressing the
Page button on
the Local E-MEM Module will show the M/E delegations for those additional Stripes.
Exchange ME
The Exchange ME button (see Transition Module , on page 173) allows you to delegate M/Es
that are not assigned to a Stripe. For example on a 4.5-M/E Kayenne system with four
Stripes, the fifth M/E can be ‘exchanged’ with a currently delegated M/E on that Stripe by
pressing the Exchange ME button. The function is global for all Stripes, i.e. if M/E-4 is
unassigned, pressing the Exchange ME button on the current PGM PST Stripe assigns M/E-4
to that Stripe and PGM PST is available for exchange (delegation) on each Stripe’s Exchange
ME button.
For Kayenne systems with more than one additional M/E than available Stripes, an M/E can
be preassigned to the Exchange ME button by holding down the button and selecting the
M/E for exchange on the Local E-MEM Module. Only one M/E for exchange can be assigned
at a time.
The Exchange ME button displays the color of the unassigned M/E. For the example above
with PGM PST and M/E-4, when PGM PST is red and M/E-4 is purple, after M/E-4 is
exchanged with PGM PST the Exchange ME button changes from purple to red (for each
Exchange ME button on all Stripes in that suite).
Automatic Delegation
With the ADel button toggled on in the Multi-Function Module, when an operator activates
any object on a Stripe, the Multi-Function Module will automatically delegate to control the
specific object involved. For example, selecting a key for the next transition, automatically
delegates the other modules in that Stripe, and the Multi-Function Module to control that
keyer. Automatic delegation only occurs when the operator presses a button on a Stripe,
and does not occur if the panel’s state is changed by an external interface, like an edit
controller.
Automatic delegations can be quickly disabled at any time on the Multi-Function Module
by toggling the ADel button to off.
Multiple Keyer Delegations
The M/E Keyer Delegation buttons on the Multi-Function Module can delegate the Keyers,
Mattes, and Masks to more than one keyer. If the Multi-Function Module’s controls have
been delegated to multiple keyers, the Multi-Function Module delegation buttons will go
off, to indicate a single keyer is not being controlled. The remaining Multi-Function Module
buttons can only display status for one of the keyers (the first one pressed). Any changes
made will be applied to all the keyers involved. Any context sensitive delegation inside the
Multi-Function Module will be based on the first keyer selected. For example, if Key 1 is a
Chroma Key and Key 2 is a Preset Pattern, adjusting Clip should change the clip for both Key
1 and Key 2. However, since Key 2 does not use Clip (being a Preset Pattern) it is unaffected.
The size of the Preset Pattern will not change.
Similarly, in the Source Select Module, you can select and hold down multiple keyer
delegation buttons, then select a source, and that source will be selected for all keyers in
the selection. The multiple selection is applied to the Multi-Function Module.