Belden Grass Valley GV Korona, Руководство пользователя

Страница: 109 / 433

109
Kayenne/Karrera/GV Korona
User Manual
• Point—simulates a spotlight type of lighting effect that radiates light evenly in all
directions.
• Bar—simulates lighting from a bar-shaped long, thin lighting source.
• Plane—simulates the glare that would be reflected from an image if a bright light were
shined on it from infinity.
Light Control Pane
Position—Used with Point and Bar light sources to control the position of the point light, or
the position of some point along the bar light, with respect to the X, Y and Z axes in 3D
space.
Rotation—Used with Bar and Plane light sources to control the direction of the bar light, or
the direction that the plane light faces along the X, Y and Z axes. Setting Rotation to 0
places the Plane light directly behind the viewer’s head.
Appearance:
• Intensity—provides soft knob control of the overall reflectivity of the surface of the
picture.
• Softness—control of softness of the edge of the light. 100% creates maximum softness,
0% gives a hard edge. At extremely small values some aliasing artifacts may appear.
• Gloss—provides soft knob control of how much light is scattered as it is reflected off
the surface of the picture. At 100% the lighting acts like it is reflecting off of a mirror. At
0% the light acts like it is reflecting off of a frosted piece of glass.
Flare—When light reflects off a surface two lighting components result, the primary
reflected light and a glare (flared halo) of scattered light. The Flare controls provide soft
knobs to adjust this lighting component.
• Intensity—controls the amount of the flare light scattered off the surface.
• Ratio—controls the ratio between the primary light and the flare light. 100% is all
primary light, 0% all flare light.
Independent Flare Intensity—allows independent control of the primary and flare
components of the light. When Off, changing the value of one control will alter the
appearance of the other component of the light. The actual values reported on the menu
will not be different, but the changes will interact automatically to create the resulting
image. When On, changing the values for one lighting component will not after the
appearance of the other component.
Light Color, Flare Color—provides soft knob controls of the Hue, Saturation, and Brightness
of the Light or Flare lighting.
Lighting Path Controls
Path controls are available for Lighting parameters and provide soft knob control for Light
Tension, Continuity, and Bias when the Curve button and Curved data pad are selected. A
Path Hold button is also provided.