Belden Grass Valley GV Korona, Руководство пользователя

Страница: 413 / 433

413
Kayenne/Karrera/GV Korona
User Manual
3 Determine where you want a mark-in point for the Video track by either
playing/jogging to the mark while viewing the clip on a monitor and selecting the
Mark In button or if you know the timecode, select the Mark In data pad and enter the
timecode into the pop-up keypad, and select Enter .
4 Determine the mark-out point for the Video track and enter it as described for Mark In.
In the Audio area (center):
1 Turn off the Use Audio From Video button by selecting it.
2 Select the Audio Thumbnail Viewer .
3 Select the Change Clip button and select the desired clip/.WAV file with the desired
Audio track.
4 Synchronize the Audio track in relation to the current video track timecode position, if
needed, using the Hold Sync data pad or the Audio Offset soft knob (see Hold Sync , on
page 409).
5 With the Video Thumbnail Viewer selected ( Video area, top), you can test the composite
elements using the motion control buttons.
Make the Sub-Clip
1 Select the Make Clip button (bottom right of menu).
2 Enter the name of the new clip and select Enter .
Add/Replace a Key Element with Build Edit
In this case, you use the video and audio of the loaded video element but add/replace the
key track and make a sub-clip. The Use Audio From Video button is enabled (highlighted
green):
1 Unless the desired clip is loaded, select the Key Thumbnail Viewer .
2 Select the Change Clip button in the Key area (bottom) and select the desired clip.
3 If selected, turn off the Use Key from Video button.
4 In the Video area, determine where you want a mark-in point for the key track by either
playing/jogging to the mark while viewing the clip on a monitor and selecting the
Mark In button or if you know the timecode, select the Mark In data pad and enter the
timecode into the pop-up keypad, and select Enter .
5 Determine the mark-out point for the Video track and enter it as described for Mark In.
6 Synchronize the Key track in relation to the current video track timecode position, if
needed, using the Hold Sync data pad or the Key Offset soft knob (see Hold Sync , on
page 409).
7 With the Video Thumbnail Viewer selected, you can test the composite elements using
the motion control buttons.
8 Select the Make Clip (bottom right of menu) button.
9 Enter the name of the new clip and select Enter .
Join Edit a Clip
Join Edit allows you to append one clip to another, and mark a thumbnail if desired.