Belden Grass Valley GV Korona, Руководство пользователя

Страница: 189 / 433

189
Kayenne/Karrera/GV Korona
User Manual
The Device Control Module controls all configured devices including:
• Serial control of VTRs and DDRs,
• Ethernet control of VTRs and DDRs,
• Image Store, and
• ClipStore.
Device Control Functionality
The Device Control Module supports the following functionality:
• Run control:
• Play,
• Cue,
• Stop/Pause,
• Jog +/-,
• Fast Forward, Rewind,
• Variable speed play,
• Mark in/out,
• Loops,
• Library of cues (Q-MEM),
• Record, and
• Ganging.
Device Control Module Organization
The Device Control Module is organized as follows:
• Device Select button group (buttons A-F), located at the top-left of the Device Control
Module, has six buttons labeled A-F. These buttons select devices for control by the
Device Control Module and when selected, show status for that device in the Status
Display (top-left).
• Status Display, located middle-right at the top, (right of the Device Select button
group),
• Run Control button group (with Cue button), located middle-right (just below the
status display),
• The two soft knobs (Knob 1 and Knob 2), at the far right of the Device Control Module
(right of status display), are:
• Knob 1, Device select knob (top)—turn to scroll through and delegate devices, and
• Knob 2, Clip select knob (bottom)—turn to scroll through and select clips
(parameters for both knobs are shown on the right in the status display.),
• Clip Editing button group, located in the middle of the Device Control Module, has
eight clip control buttons:
• Go To TC—Device jumps to keypad entered numeric time code data.
• Mark In—Captures the current Time Code of the selected device and stores it as
the ‘Mark In’ position.