Belden Grass Valley GV Korona, Руководство пользователя

Страница: 277 / 433

277
Kayenne/Karrera/GV Korona
User Manual
3 Choose the desired Path type ( S-Linear , Linear , or Curve ). If Curve is selected, you can
use the soft knobs or data pads to change the values for Tension , Continuity , and Bias .
4 Add the new values to a keyframe in the effect with Insert or Modify , or Learn . You
must change the keyframe, because current work buffer values are overwritten during
the running of an effect.
5 Run the effect to see your changes.
General Curve Tips
Although adjusting the Curve path type Tension, Continuity, and Bias controls can feel like a
guessing game, here are some general tips to help you build desired effects in a timely
manner:
• Tension in the minus direction (up to -1.0) creates bigger, looser curves.
• Continuity at +1.0 is the same as S-Linear motion.
• Continuity in the plus direction gives a bigger bounce, with +2.0 a good value.
• Bias in the plus direction makes the curve happen after the keyframe.
• Bias in the minus direction makes the curve happen before the keyframe.
Cutting and Pasting Path Values
Being aware of how Curve values may change during editing can help you successfully fine
tune the paths of edited effects.