Belden Grass Valley GV Korona, Руководство пользователя

Страница: 402 / 433

402
Advanced Operations
Clip Cueing and Playback Controls
Clip Cueing and Playback Controls
Once a movie is loaded and selected for control, the Cue to Start, Play Reverse, Stop, Play
Forward, and Cue to End buttons are available. Additional menu playback controls include:
Loop —Sets the movie to run continuously, jumping from its last frame to the first.
Bounce —Sets the movie to run to its end, reverse playback to its beginning, then play
forward, and repeat (only available when Loop is active).
Auto Start —Sets the movie to play when taken On-Air.
KF Trigs — Enables EMEM KF triggering (see E-MEM Keyframe Triggers for Image Store
Movies , on page 368).
Timecode —Opens a keypad allowing entry of a time code value to cue the movie to. This
control is also available on the Movie Record and Movie Edit menus.
Mark In —Sets the current cued location of the movie as its playback start point.
Mark Out — Sets the current location of the movie as its playback end point.
Cue to Begin — Cues to the Mark In point, if set.
Var Play Speed — When On, plays the clip at the percentage speed displayed on the right.
Clicking on the percentage allows entry of the desired speed. Supported range is from 0.1%
to 5000%.
Jog Movie —The knob on the Menu Panel can be used to jog the movie forwards and
backwards. This control is also available on the Movie Record and Movie Edit menus.
E-MEM Keyframe Triggers for ClipStore
ClipStore replay can be controlled with E-MEMs. Keyframe triggers that are E-MEMable
are:
• Load (Clip),
• Loop Enable/Disable,
• Cue (to in).
All Motion Controls:
• Clip Start,
• Reverse Play,
• Stop,
• Play,
• Clip End, and
• Variable Speed Play (Var Play Speed button).
Note: The Master E-MEM has CS-1, CS-2, CS-3, and CS-4 assigned by
default to MISC 1-4.