Belden Grass Valley GV Korona, Руководство пользователя

Страница: 102 / 433

102
Video Mix/Effects
Glow Color
Glow—The Glow effect is applied around the keyed image which remains visible.
Full raster video must be resized or cropped for glow to be visible.
Glow Only—The glow effect is applied to the entire keyed area, replacing the original keyed
image. Only the glow is shown.
Outline—The glow effect is shown around the keyed area, but the original keyed image is
not shown. Only the border area of the glow is visible.
When the Glow pane is activated, knob controls for Glow Width, Aspect, Opacity, and
Softness are available.
Glow Color
When the Glow Color pane is activated, knob controls for matte Hue, Saturation, and
Brightness become available. An approximation of the color of the matte is shown at the
bottom of the pane. Use these controls to adjust the color of the Glow.
Glow Path Control Pane
Controls for glow path, using the standard Hold, S Linear, Linear, and Curve parameters, can
be applied when the Adjust Path button is on (top right of Borderline menu).
iDPM/2D DPM Film Look Menus
With Film Look, you can create a flicker or strobe effect (similar to an old film run through a
movie projector). The affect can be adjusted to the desired look by setting the interpolation
(Frame, Field, or Adaptive for Video and Key), turning on Input Freeze and/or Strobe and
adjusting those parameters with the soft knobs. Thresholds can also be adjusted for when
working with cuts and artifacts.
Note: The Glow Softness parameter value is shared with Shadow
Softness. Adjusting either Glow or Shadow Softness will affect both Glow
and Shadow Softness.