Beko BEKOMAT BM13i, Перевод оригинального руководства по установке и эксплуатации

Страница: 55 / 76

Wear part replacement
Illustration Description / explanation
20
22
10. Insert the pressure spring [22] in the membrane
cap [20] .
20
26
11. Place the membrane cap
[20]
with the pressure
spring
[22]
on the membrane seat
[26]
. Make sure
that the pressure spring is fitted in the centre of the
membrane.
51
16
18
20
50
19
12. Insert the valve core with spring [18] into the
core guide pipe [16] . Guide the flange [51] with
the screws [50] over the core guide pipe [16] and
screw tightly on the membrane cap [20] using the
screws [19] .
13. Tighten the screws [50] with a torque of
1.5 Nm +0.5 Nm (1.11 ft-lb +0.37 ft-lb).
14. Tighten the screws [19] with a torque of
1.5 Nm +0.5 Nm (1.11 ft-lb +0.37 ft-lb).
Original installation and operation manual BEKOMAT
®
13i / 13i CO / 13i CO PN50
55 | 76