Beko BEKOMAT BM13i Скачать руководство пользователя | Manualshive

Страница: 7 / 76

background image

2.1.2 Reasonably foreseeable inappropriate use

Reasonably foreseeable inappropriate use is deemed to have occurred if the product or the accessories are used in any
other way than that described in the chapter "Intended use". Reasonably foreseeable inappropriate use includes the use
of the product or the accessories in a manner not intended by the manufacturer or supplier but which may result from
foreseeable human behaviour.
Reasonably foreseeable inappropriate use includes:
•

The execution of any kind of modification, in particular constructive and process-technology related interventions.

• The suspension, bridging or non-application of existing or recommended safety equipment.

This list is not exhaustive as not all possible inappropriate use can be foreseen in advance. If the operating company
is aware of any inappropriate use of the product or accessories which are not listed here, the manufacturer must be
informed immediately.

2.2 Responsibility of the operating company

The responsible operating company must ensure the following to prevent accidents, incidents and adverse effects on the

environment:
•  Before all actions, check to ensure that the manual available does in fact belong to the product.
•  The product and the accessories are used, serviced and repaired in accordance with the intended use.
•  The product and accessories are only used with the recommended and fully operable safety equipment.
•

All assembly, installation and maintenance work is carried out by qualified skilled technical personnel only.

•  Personnel have the necessary personal protective equipment available and also use this equipment.
•  Suitable technical safety measures are taken so that the permissible operating parameters are adhered to.
•  Keep all safety symbols and the type plate on the product in a legible state. Replace damaged and illegible marking

immediately.

Original installation and operation manual

BEKOMAT

®

13i / 13i CO / 13i CO PN50

7 | 76

«
...
5
6
7
8
9
...
»

Содержание BEKOMAT BM13i













































































Отзывы:

Нет отзывов

Похожие инструкции для BEKOMAT BM13i

Бренд: Gardena Страницы: 17

Бренд: Qual Craft Страницы: 5

Бренд: ICP Страницы: 9

Бренд: NARVI Oy Finland Страницы: 44

Бренд: Walrus Pump Страницы: 8

45 E Frame Series

Бренд: Danfoss Страницы: 44

Бренд: LVI Страницы: 42

RJS-75SS Series

Бренд: red lion Страницы: 32

HYDROMATIC G2HX

Бренд: Pentair Страницы: 12

Бренд: SAMES KREMLIN Страницы: 51

AquaMax Eco Expert 20000/12V

Бренд: Oase Страницы: 231

CTC EcoPart 400

Бренд: Regulus Страницы: 26

Бренд: Alpine Страницы: 20

Бренд: Pakole Страницы: 30

Elztrip EZ300 Series

Бренд: Frico Страницы: 12

Бренд: OilGear Страницы: 31

Бренд: Geotech Страницы: 32

BASEMENT SENTRY STBC201Q

Бренд: Zoeller Страницы: 22

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды