Beko BEKOMAT BM13i Скачать руководство пользователя | Manualshive

Страница: 39 / 76

background image

7. Electrical installation

7.1 Warning notices

DANGER

Use of incorrect spare parts, accessories or materials!

The use of incorrect spare parts, accessories or materials, as well as auxiliary and operating
materials, may result in death or serious injury. Malfunction and device failure as well as
material damage can occur.
•

Only use undamaged original parts, auxiliary and operating materials which are specified

by the manufacturer to complete all work.

• Only use the materials approved for the respective application and suitable tools in

proper working order.

• Only use electric components and materials that comply with regionally applicable

specifications and regulations for electrical safety.

DANGER

Electric voltage!

There is a danger of death or serious injuries as well as malfunction and device failure
following contact with components which are in contact with electric voltage.
• Only carry out installation, maintenance and repair work on the product and accessories

when they have been disconnected and secured against being switched back on again
unintentionally.

• Set up a safety area around the working area during all installation and repair work.
•

Adhere to all applicable regulations (e.g. VDE 0100 / IEC 60364 / ATEX) during

installation.

• Connect the protective conductor (earth connection) according to regulations.

WARNING

Insufficient qualification!

Insufficient qualification of the personnel carrying out work on the product and accessories

can lead to accidents, personal injury and damage to property as well as impair operation.
• All work on the product and the accessories may only be carried out by skilled technical

personnel - electrical engineering.

CAUTION

Inappropriate electrical installation!

Inappropriate electrical installation of the product and the accessories can lead to personal
injury and damage to property as well as impair operation.
•

Check all plug-type connections for a correct fit.

• Avoid stumbling hazard through appropriate cable routing.
• Avoid mechanical strain on the cables.

NOTE

Current supply overload!

Connecting multiple Modbus-capable devices to one Modbus client (such as a data logger)
can cause the total connected power to exceed the maximum permitted connection power
for the Modbus client.
•

Choose a Modbus client with sufficient connection power.

• Use a separate current supply for the Modbus server devices if there is no Modbus server

with sufficient connection power available.

Original installation and operation manual

BEKOMAT

®

13i / 13i CO / 13i CO PN50

39 | 76

«
...
37
38
39
40
41
...
»

Содержание BEKOMAT BM13i













































































Отзывы:

Нет отзывов

Похожие инструкции для BEKOMAT BM13i

Бренд: Warmhaus Страницы: 8

Бренд: iGenix Страницы: 6

Бренд: Paloma Страницы: 28

Бренд: Anslut Страницы: 12

Бренд: Daitsu Страницы: 50

Бренд: Bestron Страницы: 24

Бренд: Gardner Denver Страницы: 27

Aquantia KHPMS-BI Series

Бренд: Kaysun Страницы: 40

THBF701 Master Series

Бренд: bluefin Страницы: 17

Бренд: Home Страницы: 20

Бренд: Newton Страницы: 4

Gusher 30 Series

Бренд: Whale Страницы: 8

Бренд: Triad Страницы: 32

Бренд: RADtec Страницы: 7

Бренд: Robuschi Страницы: 21

Бренд: Heatrex Страницы: 5

PE-2F-PW Series

Бренд: Little Giant Страницы: 2

Бренд: WAGNER Страницы: 120

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды