Beko BEKOMAT BM13i Скачать руководство пользователя | Manualshive

Страница: 13 / 76

background image

2.5.8 Use of spare parts, accessories or materials

The use of incorrect spare parts, accessories or materials, as well as auxiliary and operating materials, may result in death
or serious injury. Malfunction and device failure as well as material damage can occur.
•

Only use undamaged original parts, auxiliary and operating materials which are specified by the manufacturer to

complete all work.

• Only use the materials approved for the respective application and suitable tools in proper working order.
• Only use cleaned pipes that are free of dirt and corrosion.
•

Only use electric components and materials that comply with regionally applicable specifications and regulations

(standards, directives etc.) for electrical safety.

2.6 Warning notices

Warning notices warn against dangers when handling the product and accessories.
In order to prevent accidents, personal injury and damage to property as well as impairments during operation, it is
essential to adhere to the warning notices.

Structural set up:

SIGNAL WORD

Type and source of danger!

Symbol

Possible consequences if the danger is ignored
• Measure to prevent the danger

Signal words:

DANGER

Imminent hazard

Consequences of non-compliance: Death or serious personal injury.

WARNING

Imminent hazard

Consequences of non-compliance: Death or serious personal injury are possible.

CAUTION

Potential hazard

Consequences of non-compliance: Personal injury or damage to property are possible.

NOTE

Additional notes

Consequences of non-compliance: Damage to property, malfunction and device failure are
possible. No hazard to people or endangerment of safe operation.

Original installation and operation manual

BEKOMAT

®

13i / 13i CO / 13i CO PN50

13 | 76

«
...
11
12
13
14
15
...
»

Содержание BEKOMAT BM13i













































































Отзывы:

Нет отзывов

Похожие инструкции для BEKOMAT BM13i

Бренд: veito Страницы: 28

Бренд: Wangen Страницы: 72

Бренд: N'oveen Страницы: 36

Бренд: EINHELL Страницы: 44

Бренд: Calorex Страницы: 2

Racor RK15438-01

Бренд: Parker Страницы: 8

Бренд: S+H Nolting Страницы: 35

Бренд: Idex Страницы: 40

Infrared Heating

Бренд: Jigsaw Страницы: 11

Бренд: Mr. Heater Страницы: 36

Pacific Hydrostar 2" or 3" Dirty Water Pump...

Бренд: Pacific hydrostar Страницы: 36

Бренд: Protemp Страницы: 51

Бренд: Yardworks Страницы: 19

Бренд: VEAB Страницы: 10

Бренд: YAMADA Страницы: 30

Бренд: Heat Controller Страницы: 15

Бренд: Coldair Страницы: 12

Бренд: ORIGO Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды