Beko BEKOMAT BM13i Скачать руководство пользователя | Manualshive

Страница: 34 / 76

background image

6. Assembly

6.1 Warning notices

DANGER

Use of incorrect spare parts, accessories or materials!

The use of incorrect spare parts, accessories or materials, as well as auxiliary and operating
materials, may result in death or serious injury. Malfunction and device failure as well as
material damage can occur.
•

Only use undamaged original parts, auxiliary and operating materials which are specified

by the manufacturer to complete all work.

• Only use the materials approved for the respective application and suitable tools in

proper working order.

• Only use pipes that are free of dirt, damage and corrosion.

DANGER

Pressurised system!

There is a danger of death or serious personal injury resulting from contact with fast or

suddenly escaping fluids or through bursting system parts.

• Before starting work, depressurise the pressurised system and secure it against

unintentional pressurisation.

• Set up a safety area around the working area during assembly, installation, maintenance

and repair work.

• Before pressurisation, check all system pipe connections for leak tightness and tighten if

necessary.

• Slowly pressurise the system.
•

Avoid pressure blows and high differential pressures.

• Assemble all pipes free of mechanical stress.
•

Install the feed lines and drain lines as fixed pipes.

WARNING

Insufficient qualification!

Insufficient qualification of the personnel carrying out work on the product and accessories

can lead to accidents, personal injury and damage to property as well as impair operation.
• All work on the product and accessories may only be carried out by skilled technical

personnel - compressed gas technology.

CAUTION

Inappropriate assembly!

Inappropriate assembly of the product and the accessories can lead to personal injury and
damage to property as well as impair operation.
• Install the product, the accessories, and all parts and materials used so that they are not

subject to mechanical tension.

•

Fix hoses in such a way that they do not flap around.

BEKOMAT

®

13i / 13i CO / 13i CO PN50

Original installation and operation manual

34 | 76

«
...
32
33
34
35
36
...
»

Содержание BEKOMAT BM13i













































































Отзывы:

Нет отзывов

Похожие инструкции для BEKOMAT BM13i

Бренд: D-D The Aquarium Solution Страницы: 8

Бренд: Gamo Страницы: 25

Бренд: Gamma Vacuum Страницы: 27

Бренд: SAER Elettropompe Страницы: 76

Бренд: Gardena Страницы: 16

Бренд: BLACKMER Страницы: 14

Бренд: Wacker Neuson Страницы: 50

Бренд: Nakayama Страницы: 29

Бренд: Black Knight Страницы: 15

Бренд: B-TEC Страницы: 11

Бренд: Zibro Страницы: 24

Бренд: Zibro Страницы: 14

Бренд: Daikin Страницы: 44

Бренд: YAMADA Страницы: 25

Бренд: Barnes Страницы: 26

Бренд: TESY Страницы: 36

Бренд: Vitek Страницы: 26

Warren Rupp SANDPIPER Beast SPB20

Бренд: Idex Страницы: 21

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды