Beckman Coulter Allegra X-14 sERIES, Инструкция по эксплуатации

Страница: 34 / 54

PN B07493AD
2-10
Operation
Disabling/Enabling the Audible Tones
3
After the rotor has stopped and the LED by the door key lights, press
DOOR
.
•
The door opens.
4
Remove the rotor (or containers).
Disabling/Enabling the Audible Tones
The audible tones (beeps) that sound when a run-parameter key is pressed, or at the end of each
run, may be turned on and off by following the steps below (rotor must be at 0 RPM). The audible
tone that sounds when an error occurs cannot be disabled.
1
To disable the key press
ENTER
, then press
2 3 6
. The words “
Disable KEY beeper
” appear on the
display.
2
To disable the end-of-run tone, press
ENTER
, then press
2 2 3
. The words “
Disable RUN beeper
”
appear on the display.
Tones that have been disabled can be enabled as follows.
1
To enable a key press
ENTER
, then press
2 3 5
. The words “
Enable KEY beeper
” appear on the
display.
2
To enable the end-of-run tone press
ENTER
, then press
2 2 2
. The words “
Enable RUN beeper
”
appear on the display.