Bay Networks Manager, Руководство пользователя

Страница: 426 / 488

am.book : ch22 62 Tue May 6 13:24:47 1997
Annex Manager User Guide
Chapter 22 Annex Parameters
22-62
Part 5 Reference Information
•
unused
to indicate that a port has no connection. You should
enter
unused
if a port is not connected to a device.
•
slip
to specify that a port can perform as a network interface
using SLIP. IP packets are encapsulated by SLIP.
•
dedicated
to allow a port to communicate only with the host
defined in the
dedicated_port
parameter. The port can
communicate via
telnet
or
rlogin ,
but not via
tn3270
or
connect .
•
ppp
to specify that a port can perform as a network interface.
PPP IP packets are encapsulated by PPP.
•
arap
to specify that a port can perform as a network interface
using ARAP.
•
auto-detect
to allow a port to identify the incoming protocol of a
packet and to convert to IPX, PPP, ARAP or CLI.
•
auto-adapt
to allow a port to detect whether packets are
incoming or outgoing. For incoming packets, the port behaves
as if it were in
auto-detect
mode. For outgoing packets, it
operates in
slave
mode.
•
ndp
to allow Novell dial-in, dial-out, and routing.
•
ipx
to allow dial-in Novell access.
•
connect
to allow a port to communicate with a LAT host via the
connect
command. This option works with the
dedicated_arguments
parameter
.
•
rlogin
to allow a port to communicate via the
rlogin
command.
This option works with the
dedicated_arguments
parameter.
•
telnet
to allow a port to communicate via the
telnet
command.
This option works with the
dedicated_arguments
parameter
.
•
tn3270
to allow a port to communicate via the
tn3270
command.
This option works with the
dedicated_arguments
parameter
.