Bay Networks Manager, Руководство пользователя

Страница: 140 / 488

am.book : ch7 12 Tue May 6 13:24:47 1997
Annex Manager User Guide
Chapter 7 Setting Asynchronous Port Values
7-12
Part 2 Setup Mode
• If the file contains a matching user name and the remote
address exists in the
acp_dialup
file, the Annex uses
that value.
• If the file does not contain a matching user name, the
Annex uses the local value, the value from the Annex.
These values may be set using the
Remote Address
window, refer to Chapter 11, Assigning Remote
Addresses.
If
remote_address
is set to
0.0.0.0
, the Annex negotiates
for the address with the remote PPP client. The
connection is denied for a remote SLIP client.
– If you select the
dhcp
button, the Annex contacts a DHCP
server to request the PPP dialup addresses.
– If you select the
Local
button, the Annex uses the
value from
the Annex.
If
remote_address
is set to
0.0.0.0
, the Annex negotiates for
the address with the remote PPP client. The connection
is denied for a remote SLIP client.
• The
Interface Protocol
box lists the control protocols for which
the Annex negotiates. You can select a single button or any
combination of the following buttons:
–
atcp
specifies AppleTalk Protocol Control Protocol.
–
ipcp
specifies Internet Protocol Control Protocol.
–
ipxcp
specifies the Internet Packet Exchange Control
Protocol.
–
ccp
specifies the Compression Control Protocol.