Bay Networks Manager, Руководство пользователя

Страница: 213 / 488

am.book : ch16 5 Tue May 6 13:24:47 1997
16-5
Chapter 16 Viewing and Changing Parameters
Annex Manager User Guide
Part 3 Customize Mode
3. For Async Port(s)
,
Printer Port(s)
,
DS0 Channel(s)
, and
WAN Module #
enter one or more port or channel numbers or
All
in the field.
To enter specific ports or channels, separate numbers with commas
or indicate a range of numbers using dashes. For example, you
might enter
1
,
3
,
8
to specify three ports, or
1-3, 8
to specify ports
1 through 3 and port 8. For
Enet
port(s),
1
displays automatically.
You cannot change this value.
Reading the Output Box
The
Show
window output box lists parameter names and values. The
output box always includes:
• A message informing you that you may need to enter port or
channel information when you first use
Show
.
• A separate section for each Annex you selected. In
Figure 16-1 , a line of asterisks separates information about two
Annexes.
• All parameters included in a group or all parameters you
selected.
– Parameters in groups display in the order in which they
appear in the group. If you choose a parameter that requires
port or channel information and you enter more than one
port or channel number, the output box displays a separate
line for each port or channel.
– Parameters you select from the parameter lists appear in
alphabetical order.
If Annex Manager cannot process the Show command based on your
selections in the main window, or if your choices are not valid for all the
Annexes you selected, a warning window displays. For example, a
warning window appears if you entered a port or channel type that does
not match the group you select or a port or channel number that does not
exist on the Annex you select. For more information about warning and
error messages, see
Identifying Errors on page 16-16.