Bay Networks Manager, Руководство пользователя

Страница: 120 / 488

am.book : ch6 2 Tue May 6 13:24:47 1997
Annex Manager User Guide
Chapter 6 Selecting General Settings
6-2
Part 2 Setup Mode
Using the General Window
The
General
window includes basic Annex information in
Boot Info, Logging
,
and
Time
boxes.
The
Boot Info
box uses the following fields:
•
Default Host
identifies the host used for the host server and for all
services unless you enter host addresses in the
General
(continued
) window. When this window first appears, the
Default
Host
field displays the current address in the Annex's
pref_load_addr
parameter.
When you configure an Annex for the first time, the
Security
Preferred Host
,
DHCP Preferred Host, Nameserver Preferred Host
,
Nameserver Alternate Host, Time Host, Logging Host,
and
Dump Host
fields are
0.0.0.0
. In this situation, Annex Manager sets those fields
to the address in the
Host
field. You can change these addresses using
the
General (continued)
window.
•
Load Sequence
specifies available network interfaces and the
order in which they are used for a down-line load or an up-line
dump. You can list more than one interface by using commas to
separate interface names. You can enter:
–
net
to specify a local area network.
–
sl + port number
(e.g.,
sl2
) to specify a SLIP line. If you enter
sl
and a port number, you must enter an address in the
slip_load_dump_host
parameter.
–
self
to instruct an Annex to boot its image from the Flash
ROMs. Since the Annex cannot dump back to itself, you
should include a secondary interface here by entering
self,net
or
self,sl+port number.