Bay Networks Manager, Руководство пользователя, Страница: 425 / 488

am.book : ch22 61 Tue May 6 13:24:47 1997
22-61
Chapter 22 Annex Parameters
Annex Manager User Guide
Part 5 Reference Information
metric defines the hop count to the remote end of the serial line when
mode
is set to
slip
or
ppp
. Modify this parameter only if you want the Annex to use a route other
than the SLIP or PPP interfaces to the remote end.
min_unique_hostnames specifies whether you can identify a host in the host table by entering a minimal
string rather than the full host name.
mode
sets the mode for access to an asynchronous port. For more information about
modes, see the Remote Annex Administrator’s Guide for UNIX and the Annex
Administrator’s Guide for DOS. You can enter:
•
cli
to allow a port connected to a terminal or incoming modem
access to CLI. CLI provides access to the network and
connections to other hosts via the
telnet
,
connect
,
rlogin
and
tn3270
commands
.
The
tn3270
command is available only when
option_key
is set to an appropriate value.
•
slave
to indicate that a port provides access to modems, serial
line printers, and other serial devices attached to an outgoing
port. It does not provide access to the CLI.
•
adaptive
to allow slave and CLI capabilities. If a connection is
initiated via an Annex, the port enters CLI mode. If a
connection is initiated via a port server, the port enters slave
mode.
Type
Async
Values 1 to 15
Default
1
Lists
Async Port, PPP, SLIP
Type
Annex
Values
enabled or disabled
Default disabled
Lists
Annex Only, Modem