manualshive.com logo in svg

Bay Networks Manager, Руководство пользователя

Поделиться
Скачать
Bay Networks Manager Скачать руководство пользователя страница 349

am.book : ch21    3  Tue May  6 13:24:47 1997

21-3

Chapter 21    Annex Manager and SNMP

Annex Manager User Guide

Part 4    Control and Status Commands

SNMP Agents

Annex software includes a process known as the SNMP agent. The agent
process acts as a server in a typical client-server model:

•

Annex Manager directs

get

,

set

, and

get-next

 commands to the

agent.

•

The agent processes the command and returns a response
indicating the success or failure of the command and returning
the requested data for the

get

 and

get-next

 commands.

Message Delivery

SNMP messages are encapsulated in UDP datagrams. The UDP layer
does not guarantee delivery. When Annex Manager transmits a

get

,

set

,

or

get-next

 command, the agent is expected to respond with an error

message or with the requested data. Annex Manager uses a timeout and
retry mechanism to guarantee the delivery of the SNMP. If a timeout
occurs, Annex Manager does not know whether the command was not
received by the agent, or whether the response from the agent was lost.

The agent can also generate an unsolicited trap command and send it to
one or more network addresses. Receivers of traps do not respond to the
SNMP agent. For detailed information, please refer to Trap Hosts and
Traps later in this chapter.

The Annex supports only the cold-start, link-up, and link-down traps
defined in MIB-II and the

suspectAttack

,

acpdbmerror

,

modemError

,

callBegin

,

callEnd

,

unexpectDisconnect

, and

nodeUnreachable

 traps

defined in the

xylo-trpdef.mib

.

Содержание Manager









































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды