manualshive.com logo in svg

Bay Networks Manager, Руководство пользователя

Поделиться
Скачать
Bay Networks Manager Скачать руководство пользователя страница 24

am.book : intro    xxx  Tue May  6 13:24:47 1997

Annex Manager User Guide

Introduction

xxx

–

Use predefined configuration script files to configure
Annexes and ports.

•

Compare parameters and values for two Annexes, for an Annex
and a script, or for two scripts.

•

Copy the current parameter settings from one port to another or
from one Annex to another.

•

Retrieve basic status and statistics information from an Annex
or from a specific port on more than one Annex.

•

Define site specific defaults.

•

Identify Annexes in the network.

•

Save lists of Annex names or addresses.

•

Display default values for each configuration parameter.

•

Boot and reset Annexes.

•

Edit Annex configuration file.

•

Reset ports or Annex subsystems automatically after you
change parameter settings.

Supported Annex Hardware and Software

•

Annex Manager supports the following Annex hardware
platforms: RA2000, RA4000, RA6100, RA6300, Bay
Networks 5391, Bay Networks 5393, and Bay Networks Model
5399 Remote Access Concentrator Module.

•

Annex Manager supports Annex software versions 13.3 and
14.0.

Содержание Manager









































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды