87
Static IP Address Configuration
Configuring SuperTCP for a static IP address requires configuring both SuperTCP and FastLink II for the same
static IP address.
To configure SuperTCP for a static IP address:
1
Run the SuperTCP configuration utility by clicking on the SetupTCP icon in the SuperTCP
Windows group
2
Select the Interfaces icon in the left-hand side list box.
3
Set the IP Address Type by selecting the
Fixed
radio button.
4
Enter your static IP address in the IP Address field.
5
Enter your IP subnet mask in the IP Address Mask field.
6
Select the IP Setup icon in the left-hand side list box.
7
Enter your remote access server gateway address in the Default Gateway field.
8
Check the box labeled Always Use Default Gateway As Next Hop.
9
After you make your changes press
[Close]
.
To configure FastLink II for a static IP address:
1
Run FastLink II, and select the Connections button at the left of the screen. Highlight the Connect
drop-down box, and select the connection whose settings you want to set for your IP connection.
2
Click on the
[IP Protocol Settings]
button, and check the Static IP address button.
3
Highlight the Address field and enter your static IP address.