![background image](http://html1.mh-extra.com/html/bay-networks/fastlink-ii/fastlink-ii_user-manual_2712547082.webp)
85
System File Requirements
Your AUTOEXEC.BAT (or the file you use to load your network stack) should contain lines like these:
C:\FLINK\LSL
C:\FLINK\FLODI
C:\BEAME\STARTNET
However, if you are going to use dynamic addressing (and RARP protocol), you must defer execution of
STARTNET until you have connected. So the necessary sequence is to execute LSL and FLODI, then use
FLINK to connect. Once you are connected, you may then execute STARTNET prior to invoking Windows.
In addition, verify that the SET DOMAIN statement in the AUTOEXEC.BAT is correctly pointing to your
domain. If your domain were XYZ.COM, this statement should read
SET DOMAIN XYZ.COM